Email:info@eoexport.com Liaoning EO Technology Co.,Ltd

Liaoning EO Technology Co.,Ltd

How Is The Tee Connector Made?

The tee joint is formed to be a tube billet larger than the tee diameter, the size of the diameter of the tee is flattened, and a hole is opened in the part of the stretching branch tube, and the tube billet is heated and put into the forming mould, and the die of the drawing branch tube is loaded in the Tube billet, and the tube billet is compressed radially under the action of pressure, In the process of radial compression, the metal flows toward the branch pipe and forms the branch tube under the drawing of the die. The whole process is formed by the radial compression of the tube billet and the stretching process of the branch tube part. Unlike the hydraulic bulging tee, the metal of the Tee Joint branch is compensated by the radial motion of the tube billet, so it is also called the radial compensation process.

The equipment tonnage required for material forming is reduced due to the use of heating to suppress the tee. Hot-Pressing tee has a wide adaptability to the material, suitable for low carbon steel, alloy steel, stainless steel material, especially the tee with large diameter and thick pipe wall, usually adopt this kind of forming process.


Copyright © Liaoning EO Technology Co.,Ltd All Rights Reserved.
QR Code